 website |  catalog |  manual |  drawing |
13,362 LPH + 241 Bar & Highly Accurate
• 적은 유량에서 시작하여 13,362 LPH까지 유량 조절이 가능한 펌프 제조업체는 많지 않습니다. Series 4000 펌프는 펌프가 수행할 수 있는 가장 위험한 작업 조건을 견디도록 만들어졌다. 정밀 유량 조절이 가능하며, 1% 미만의 변동으로 흐름의 일관성을 유지한다.
• 다른 모든 AquFlow 정량 펌프와 마찬가지로, 이는 API 675 요건을 준수합니다. AquFlow 시리즈는 인기 있고 입증된 설계 요소, 즉 유압 밸런스 다이어프램, 마모 최소화를 위해 윤활유 유압 오일에서 작동하는 구동 부품, 작동, 유지 및 재작업이 용이한 모듈식 설계 등 모든 편리한 유지 보수 요소를 보유하고 있습니다.
• 부식 저항성이 높은 316 Stainless Steel과 Alloy 20, Hastelloy C, PVC and PVDF 같은 내화학성이 높은 재료 사용하여 펌프의 내구성이 높습니다. 이 펌프는 또한 디스크 밸브를 사용하여 더 높은 점성과 약간의 부유물이 이송될 때 더 큰 Discharge Connection을 제공합니다.
Feature | Spec |
Flow Capacity | Up to 13,362 LPH (Duplex) |
Pressure | Up to 241 Bar |
Design | Modular design in aluminum housing |
Metering Accuracy | +/- 1% |
Capacity Controls | Manual/Auto |
Safety | Built-in internal relief valve |
Availability | Duplex or Double Flow Capacity |
Liquid Handling | Able to handle difficult liquids like slurries, off-gasing, high viscosities |
• Specification
Specification | Measurement |
Flow Capacity Adjustment | 0–100% while the pump is running or stopped |
Turndown Ratio | Stroke Length 10:1 |
Metering Accuracy | Steady State: ± 1% |
Max. Process Fluid Temp. | Custom engineered metallic liquid end: 500°F (260C) |
Plunger Stroke Length | 6" |
Hydraulic Oil Capacity | - |
Displacement Per Stroke (by plunger size) | 7/8" - 2.2698 cu. in. (37.19 ml) |
Liquid End Material Options | 316 SS, Alloy 20, Hastelloy C, PVC, PVDF and PTFE |
• Performance Table
Model No. | Capacity | Pressure | Speed | Plunger | Connection | Performance |
GNIT 0744-0X01A | 22.6 (85.5) | 3,500 (241) | 44 | 7/8" | 1-1/4" | Curves |
GNIT 0770-0X01A | 36.0 (136.3) | 3,500 (241) | 70 | 7/8" | 1-1/4" | Curves |
GNIT 0788-0X01A | 45.0 (170.3) | 3,500 (241) | 88 | 7/8" | 1-1/4" | Curves |
GNIT 0740-0X01A | 72.0 (272.5) | 3,500 (241) | 140 | 7/8" | 1-1/4" | Curves |
GNIT 0944-0X01A | 38.5 (145.7) | 2,000 (138) | 44 | 1-1/8" | 1-1/4" | Curves |
GNIT 0970-0X01A | 61.5 (232.8) | 2,000 (138) | 70 | 1-1/8" | 1-1/4" | Curves |
GNIT 0988-0X01A | 77.0 (291.5) | 2,000 (138) | 88 | 1-1/8" | 1-1/4" | Curves |
GNIT 0940-0X01A | 123 (465.6) | 2,000 (138) | 140 | 1-1/8" | 1-1/4" | Curves |
GNIT 1344-0X01F | 79.5 (300.9) | 1,000 (69) | 44 | 1-9/16" | 2-1/2" | Curves |
GNIT 1370-0X01F | 126 (477.0) | 1,000 (69) | 70 | 1-9/16" | 2-1/2" | Curves |
GNIT 1388-0X01F | 159 (601.9) | 1,000 (69) | 88 | 1-9/16" | 2-1/2" | Curves |
GNIT 1340-0X01F | 253 (957.7) | 1,000 (69) | 140 | 1-9/16" | 2-1/2" | Curves |
GNIT 2044-0X01F | 210 (794.9) | 370 (26) | 44 | 2-1/2" | 2-1/2" | Curves |
GNIT 2070-0X01F | 335 (1,268.1) | 370 (26) | 70 | 2-1/2" | 2-1/2" | Curves |
GNIT 2088-0X01F | 421 (1,593.7) | 370 (26) | 88 | 2-1/2" | 2-1/2" | Curves |
GNIT 2014-0X01F | 671 (2,540.0) | 370 (26) | 140 | 2-1/2" | 2-1/2" | Curves |
GNIT 2444-0X01H | 304 (1,150.8) | 295 (20) | 44 | 3" | 4" | Curves |
GNIT 2470-0X01H | 485 (1,835.9) | 295 (20) | 70 | 3" | 4" | Curves |
GNIT 2488-0X01H | 609 (2,305.3) | 295 (20) | 88 | 3" | 4" | Curves |
GNIT 2440-0X01H | 970 (3,671.8) | 295 (20) | 140 | 3" | 4" | Curves |
GNIT 3244-0X01H | 554 (2,097.1) | 160 (11) | 44 | 4" | 4" | Curves |
GNIT 3270-0X01H | 882 (3,338.7) | 160 (11) | 70 | 4" | 4" | Curves |
GNIT 3288-0X01H | 1,109 (4,198.0) | 160 (11) | 88 | 4" | 4" | Curves |
GNIT 3240-0X01H | 1,765 (6,681.2) | 160 (11) | 140 | 4" | 4" | Curves |
• S4000 Options
Capacity Control Options
- Dual Axis with both stroke length and stroke speed adjustable.
Stroke Length Controls
- Manual: Standard on all pumps.
- Electric: Electric stepper motor. Capable of 4-20mA input.
- Pneumatic: Runs on 30 PSI air for hazardous environment.
• Liquid Handling Options
Tubular
- For liquids with suspended solids/slurries that may clog. Good for high viscosity liquids also.
Degassing Valve
- Some challenging liquids can cause air locking due to off gassing. Our pump head with degassing valve ensures accurate and consistent pumping by letting our gas bubbles from the pump head.
Double Ball Check Valve
- An added measure of assurance that you have the position valve shut off.
Tungsten Carbide Valve Balls
- For abrasive liquids
• Leak Detection Options
Leak Detection
- There are two types of leak detection options available with AquFlow pumps.
Conductive
- Conductivity probe between 2 diaphragms to sense any break or rupture.
Vacuum
- Uses a vacuum switch between 2 diaphragms to sense any rupture or failure.
• Other Options
Liquid Connections
- NPT / FLANGE / TRICLAMP
Motor Options
- Enclosure: TEFC, TENV, Explosion Proof, Washdown
- Power Supply: ACV 115V, 230V, 380V, 460V, DC-12, 24, 90, 180, Single Phase, 3-Phase
| website | catalog | manual | drawing |
13,362 LPH + 241 Bar & Highly Accurate
• 적은 유량에서 시작하여 13,362 LPH까지 유량 조절이 가능한 펌프 제조업체는 많지 않습니다. Series 4000 펌프는 펌프가 수행할 수 있는 가장 위험한 작업 조건을 견디도록 만들어졌다. 정밀 유량 조절이 가능하며, 1% 미만의 변동으로 흐름의 일관성을 유지한다.
• 다른 모든 AquFlow 정량 펌프와 마찬가지로, 이는 API 675 요건을 준수합니다. AquFlow 시리즈는 인기 있고 입증된 설계 요소, 즉 유압 밸런스 다이어프램, 마모 최소화를 위해 윤활유 유압 오일에서 작동하는 구동 부품, 작동, 유지 및 재작업이 용이한 모듈식 설계 등 모든 편리한 유지 보수 요소를 보유하고 있습니다.
• 부식 저항성이 높은 316 Stainless Steel과 Alloy 20, Hastelloy C, PVC and PVDF 같은 내화학성이 높은 재료 사용하여 펌프의 내구성이 높습니다. 이 펌프는 또한 디스크 밸브를 사용하여 더 높은 점성과 약간의 부유물이 이송될 때 더 큰 Discharge Connection을 제공합니다.
Feature | Spec |
Flow Capacity | Up to 13,362 LPH (Duplex) |
Pressure | Up to 241 Bar |
Design | Modular design in aluminum housing |
Metering Accuracy | +/- 1% |
Capacity Controls | Manual/Auto |
Safety | Built-in internal relief valve |
Availability | Duplex or Double Flow Capacity |
Liquid Handling | Able to handle difficult liquids like slurries, off-gasing, high viscosities |
• Specification
Specification | Measurement |
Flow Capacity Adjustment | 0–100% while the pump is running or stopped |
Turndown Ratio | Stroke Length 10:1 |
Metering Accuracy | Steady State: ± 1% |
Max. Process Fluid Temp. | Custom engineered metallic liquid end: 500°F (260C) |
Plunger Stroke Length | 6" |
Hydraulic Oil Capacity | - |
Displacement Per Stroke (by plunger size) | 7/8" - 2.2698 cu. in. (37.19 ml) |
Liquid End Material Options | 316 SS, Alloy 20, Hastelloy C, PVC, PVDF and PTFE |
• Performance Table
Model No. | Capacity | Pressure | Speed | Plunger | Connection | Performance |
GNIT 0744-0X01A | 22.6 (85.5) | 3,500 (241) | 44 | 7/8" | 1-1/4" | Curves |
GNIT 0770-0X01A | 36.0 (136.3) | 3,500 (241) | 70 | 7/8" | 1-1/4" | Curves |
GNIT 0788-0X01A | 45.0 (170.3) | 3,500 (241) | 88 | 7/8" | 1-1/4" | Curves |
GNIT 0740-0X01A | 72.0 (272.5) | 3,500 (241) | 140 | 7/8" | 1-1/4" | Curves |
GNIT 0944-0X01A | 38.5 (145.7) | 2,000 (138) | 44 | 1-1/8" | 1-1/4" | Curves |
GNIT 0970-0X01A | 61.5 (232.8) | 2,000 (138) | 70 | 1-1/8" | 1-1/4" | Curves |
GNIT 0988-0X01A | 77.0 (291.5) | 2,000 (138) | 88 | 1-1/8" | 1-1/4" | Curves |
GNIT 0940-0X01A | 123 (465.6) | 2,000 (138) | 140 | 1-1/8" | 1-1/4" | Curves |
GNIT 1344-0X01F | 79.5 (300.9) | 1,000 (69) | 44 | 1-9/16" | 2-1/2" | Curves |
GNIT 1370-0X01F | 126 (477.0) | 1,000 (69) | 70 | 1-9/16" | 2-1/2" | Curves |
GNIT 1388-0X01F | 159 (601.9) | 1,000 (69) | 88 | 1-9/16" | 2-1/2" | Curves |
GNIT 1340-0X01F | 253 (957.7) | 1,000 (69) | 140 | 1-9/16" | 2-1/2" | Curves |
GNIT 2044-0X01F | 210 (794.9) | 370 (26) | 44 | 2-1/2" | 2-1/2" | Curves |
GNIT 2070-0X01F | 335 (1,268.1) | 370 (26) | 70 | 2-1/2" | 2-1/2" | Curves |
GNIT 2088-0X01F | 421 (1,593.7) | 370 (26) | 88 | 2-1/2" | 2-1/2" | Curves |
GNIT 2014-0X01F | 671 (2,540.0) | 370 (26) | 140 | 2-1/2" | 2-1/2" | Curves |
GNIT 2444-0X01H | 304 (1,150.8) | 295 (20) | 44 | 3" | 4" | Curves |
GNIT 2470-0X01H | 485 (1,835.9) | 295 (20) | 70 | 3" | 4" | Curves |
GNIT 2488-0X01H | 609 (2,305.3) | 295 (20) | 88 | 3" | 4" | Curves |
GNIT 2440-0X01H | 970 (3,671.8) | 295 (20) | 140 | 3" | 4" | Curves |
GNIT 3244-0X01H | 554 (2,097.1) | 160 (11) | 44 | 4" | 4" | Curves |
GNIT 3270-0X01H | 882 (3,338.7) | 160 (11) | 70 | 4" | 4" | Curves |
GNIT 3288-0X01H | 1,109 (4,198.0) | 160 (11) | 88 | 4" | 4" | Curves |
GNIT 3240-0X01H | 1,765 (6,681.2) | 160 (11) | 140 | 4" | 4" | Curves |
• S4000 Options
Capacity Control Options
- Dual Axis with both stroke length and stroke speed adjustable.
Stroke Length Controls
- Manual: Standard on all pumps.
- Electric: Electric stepper motor. Capable of 4-20mA input.
- Pneumatic: Runs on 30 PSI air for hazardous environment.
• Liquid Handling Options
Tubular
- For liquids with suspended solids/slurries that may clog. Good for high viscosity liquids also.
Degassing Valve
- Some challenging liquids can cause air locking due to off gassing. Our pump head with degassing valve ensures accurate and consistent pumping by letting our gas bubbles from the pump head.
Double Ball Check Valve
- An added measure of assurance that you have the position valve shut off.
Tungsten Carbide Valve Balls
- For abrasive liquids
• Leak Detection Options
Leak Detection
- There are two types of leak detection options available with AquFlow pumps.
Conductive
- Conductivity probe between 2 diaphragms to sense any break or rupture.
Vacuum
- Uses a vacuum switch between 2 diaphragms to sense any rupture or failure.
• Other Options
Liquid Connections
- NPT / FLANGE / TRICLAMP
Motor Options
- Enclosure: TEFC, TENV, Explosion Proof, Washdown
- Power Supply: ACV 115V, 230V, 380V, 460V, DC-12, 24, 90, 180, Single Phase, 3-Phase